Hydroxyapatite (HA) nanopowders are attracting interest for surface application to ceramic biomaterials. In this study, we developed innovative and new viable synthesis routes of calcium phosphate nanopowders from the natural calcium carbonate of chicken eggshells. Following the four routes, alternative co-precipitation, vacuum process, brushite, and calcination, we obtained the HA samples, which were then characterized by different methods. The X-ray diffraction /Rietveld method showed the HA phases, monetite and brushite crystallinity with greater symmetry, and nanoscale. Transmission electron microscopy showed the morphology of nanoparticles functionalized nanoparticles smaller than 100 nm in routes A, B and D, and Fourier-transform infrared spectrophotometry and Raman spectroscopy identified the classic chemical groups of calcium phosphates by four routes mainly groups (PO4)3- and (CO3-). Scanning electron microscopy analysis revealed a good surface topography to future cell biointeraction in A, B and D routes, and thermogravimetric analysis showed the mass loss profile inherent to each synthesis route with slot at 200 °C. Hence, the eggshell HA and brushite and the specific monetite nanoparticles with different morphology can be prepared from the four new possible and viable routes using different methods.

ABSTRACT Samples of the Al 7075 naturally and artificially aged were processed by conventional and asymmetrical rolling with 5% of thickness reduction. The rolling processes were evaluated under room temperature and under warm condition (130°C). Mechanical properties were evaluated by uniaxial tensile and Vickers microhardness tests. Microstructure evolutions were followed by optical microscopy analysis. Naturally aged samples showed better yield strengthening under warm processing. Greater ultimate stress and ductility under room temperature processing was also noticed in naturally aged specimens. Artificially aged samples showed better mechanical properties under room temperature, softening under warm processing due to grain recovery process. Microhardness tests showed expected results for both rolling types, especially on asymmetrical rolling with the higher predictions were observed. Micrographs have shown no expressive grain changes or refinement although its flattening was observed. Precipitates were analyzed by EDS/SEM revealing the presence of MgZn2 and CuMgAl along the matrix that provides plastic strengthening.

The superduplex stainless steels (SDSS) are widely used in chemical, oil and gas industries, to pipelines and storage material facilities. In welding process or working in temperature elevated, secondary phases may appear in the form of precipitates, as the sigma phase (σ) which is an intermetallic compound. This compound is harmful to the properties of steel, deteriorating its mechanical properties, such as decreasing corrosion resistance and toughness. In this paper it is analyzed the formation, kinetics and microstructural evolution of sigma phase in SDSS UNS S32750 after isothermal aging at 700ºC, 750ºC and 800ºC. In this work sigma phase kinetics is studied by JMAK theory and by two microstructural path descriptors, SV, interfacial area per unit of volume between sigma phase and austenite, and <λ>, mean chord length of sigma, both in function of the VV, volumetric fraction of sigma, known in the literature as microstructural partial path (MP). The MP formulation is common in recrystallization studies, but so far has not been used in the sigma phase precipitation studies, being applied here for the first time. The results indicated that the sigma phase nucleates by site saturation with anisotropic linear impingement. This means that sigma phase nucleates on edges.